Operation Manual

www.argonaudio.com

iNet3+v2

8. FM radio mode

FM radio mode receives analogue radio from the

FM band and displays RDS (Radio Data System)

information about the station and show (where broadcast).

To enter FM mode, either press Mode until the display

shows FM Radio or select Menu > Main menu > FM.

8.1 Selecting stations

To find a station, press Select . The frequency display starts to run up as iNet3+v2 scans the

FM band. Alternatively, you can scan up or down by pressing and holding the >> or << buttons

or tune manually with quick presses, or by turning the Select control.

Presets

To store an FM preset, press and hold Preset until the display shows the Save preset screen.

Select one of the 10 presets to save the currently playing station.

To select a preset, press Preset briefly, then select one of the listed preset stations. When a preset

station is playing, it shows Pn (P1, P2 etc) in the bottom right of the screen.