Operation Manual

www.argonaudio.com
iNet2+
17
3. Getting started/setup
Although the Argon iNet2+ is sophisticated, getting started is simple. To play DAB or FM radio, all
you need is a power source (a 100-240 V mains supply).
For Music Player mode, you need a wired/wireless Ethernet network and a UPnP music server
(e.g. a PC).
For Internet-connected modes such as Internet radio, you also need a broadband Internet
connection.
To set up the iNet2+:
1. Place iNet2+ on a suitable shelf or table
2. Connect the power adaptor between iNet2+ and the mains supply.
3. To receive broadcast radio (DAB and FM), extend the telescopic antenna.
The setup wizard starts.