Operation Manual

www.argonaudio.com
14
DAB3+
In Mono mode, the radio plays mono output only. Some stations sound better in this mode if the signal is not
strong enough to receive noiseless stereo signal.
<System> See point 4.5 page 18
3.4 AUX Mode
Using the AUX IN jack
1. Use a 3.5mm stereo-to-stereo cable (mini-jack) to connect an external device, like your Mobile
phone, Laptop or iPod to the AUX IN jack, on the back of your radio.
2. Press the “Source” (6) button until the display shows “Aux”. Once connected to the 3,5 mm plug
on the back your radio will start playback of the music on the connected external device.
3. To adjust the radio volume level, you may need to adjust the volume on your external audio
device. In other words you can adjust the sound level both on the Radio and on the External
device.
3.5 Bluetooth mode
3.5.1 Enabling Bluetooth
Bluetooth can be activated in two ways:
1. Either by pressing the "SOURCE" (6) button until radio shows FM → BT
2. Or, by pressing directly on the "Bluetooth" (17) button on the front of the radio.
3.5.2 Connecting Bluetooth
1. Turn on Bluetooth on your Media playback device (mobile phone, tablet, PC etc.).
2. "Make Device Discoverable" on your Media playback device (mobile phone, tablet, PC etc.).