Operation Manual

www.argonaudio.com
11
DAB+ adaptor
F. ”Sleep” button
The Sleep function can be set to turn the DAB+ Adaptor off automatically after a predefined time.
The Sleep function turn-off-time is set the following way:
Press and hold "Sleep" button for 3 sec.
Press "Tune + or -" to select ON or OFF
Confirm by pressing “Select”
Press "Tune + or -" to Sleep time
Confirm the wished Sleep time by pressing “Select”.
G. ”AutoScan” button
By pressing ”Autoscan” the DAB+ Adaptor will automatically scan for new stations. Display will show
scanning status as in figur 3-5
There are two Auto scan options:
(1) Auto tune local: Scan all frequencies in the national channel allocation. This should take only a few
seconds to do.
Local auto tune is activated by a short press on the “Auto scan” button.
(2) Auto tune full: Scan the full range of all digital frequencies. This may take a few minutes.
Full auto tune is activated by pressing and holding the “Auto scan” button for 3 sec.