Specifications

www.argonaudio.com
iNet6+
16
The date and time are displayed as dd-mm-yyyy and hh:mm
AM/PM with the first value, dd, active (flashing).
Adjust each value with the Select control. As each value is set,
the next value becomes active and flashes.
3.1.3 Network
Argon iNet6+ is compatible with all common network protocols and encryption methods, including Wi-Fi Protected
Setup (WPS).
To connect Argon iNet6+ to your network, you need one of the following:
• A wired router and an Ethernet (RJ45 network) cable
• A Wi-Fi wireless router, together with password key if set
Select WLAN region/country > Wi-Fi network (SSID), and then
select a network from the list.
To connect to a wired network, select [Wired], after ensuring that
the Ethernet cable from the wired router is connected to the
Ethernet socket of the Argon iNet6+.
If the network is open (non-encrypted), Argon iNet6+ connects without any further ado; see Completion below.