Instruction manual

www.argonaudio.com
iNet2+
90
12. Software upgrades and factory reset
12.1 Software upgrade
From time to time, Argon may make software upgrades available with bug fixes and/or additional
features. You can either check manually, or set iNet2+ to check periodically automatically (this is
the default). If iNet2+ detects that newer software is available, it asks if you want to go ahead with
an update. If you agree, the new software is then downloaded and installed. After a software
upgrade, all user settings are maintained.
CAUTION:
Before starting a software upgrade, ensure that iNet2+ is plugged
into a stable mains power connection. Disconnecting power
during a software update may permanently damage the unit.
To turn automatic checking on or off, select Menu > System settings > Software update >
Auto-check setting.
12.2 Factory reset
A factory reset resets all user settings to default values, so time/date, network configuration and
presets are lost. However, the radio’s current software version is maintained, as is registration
with the Internet radio portal. Internet radio favourites therefore remain unless you re-register your
radio with another account on the portal website.
To perform a factory reset, select Menu > System settings > Factory reset Proceed > Yes.