Instruction manual

www.argonaudio.com
iNet2+
20
Auto-update
Auto-update works with data sent
over DAB, FM or the Internet. The
clock is only updated when in a
corresponding mode, so it is best to
select a mode you use regularly.
DAB and FM use time signals
broadcast with radio transmissions.
Network uses a time signal sent
from the Frontier Silicon Internet
radio portal when in any network-
connected mode.
1. Select Update from DAB, Update from FM, Update from Network or No update.
2. If you are updating from the network, set your time zone.
3. If your country uses daylight saving, the automatically updated time from the network may
be wrong by one hour. When daylight savings are in effect (during the winter), turn on the
Daylight savings option to rectify this.
Note that if you are updating the time from DAB or FM, the Daylight savings option has no
effect on the clock’s time.