Owner`s manual

www.argonaudio.com 6
DA2 V2
Remote control
DA2 comes with a remote control.
The remote control is a system remote control
that also can control Argon iNet6+ which is an
Internet tuner in same family as DA2.
The section with the white square around is
dedicated to DA2, as well as the Red Power
“ON” button saying “DA2”.
The rest of the controls on the remote are
dedicated iNet6+ (see page 10)
Notice:
Controlling Bass, Treble and Balance levels
can only be done via the remote.
Notice:
If DA2 is connected with a Argon iNet6+ they
have to be connected only by Optical digital
out/in.
If iNet6+ is connected to DA2 via analogue
RCA the volume function on the remote will not
work properly.