Instruction Manual MODEL NO.: 7340A v2 7350A v2 www.argonaudio.
Contents Contents / Accessories P2 Important Safety Instructions P3 Unpacking etc.
Important Safety Instructions 1 Read these instructions for all components 1 Servicing is required when the apparatus has before using this product. 1 Keep these instructions for future reference. 1 Heed all warnings on the product and in the owner guide. 1 Follow all instructions. 1 Do not use this apparatus near water or moisture. Do not use this product near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture are present.
Unpacking Your Argon speakers were carefully tested and inspected before packaging and shipping. After unpacking please check for any damage. It is rare that a unit is damaged during shipping, but if this does happen contact the shipping company immediately. We recommend that you keep the original carton and packing material for future shipping. Recommended Speaker Setup It is true that proper speaker placement has a huge impact on sound quality.
Active speaker (Left speaker) features LEFT SPEAKER REAR FRONT OUT TO RIGHT STEREO INPUT OUT TO RIGHT SPEAKER STEREO INPUT R SUB OUT L AUDIO IN 5VDC CHARGE FOR iPOD POWER ON/OFF SUB OU T AUDIO INPUT 5V DC Charge for iPod POWER ON/OFF AC IN AC~220 - 240V 50/60Hz POWER LED VOLUME Argon Speakers Features iPod power charging port (Combo Port) 2 audio inputs Built-in power amplifier, no receiver needed Front panel volume control Kevlar woofers for super low end Silk dome tweeters for s
Connecting Your System 1 OUT TO RIGHT STEREO INPUT R SUB OUT L AUDIO IN 5VDC CHARGE FOR iPOD POWER ON/OFF 2 1 Step 1 - SPEAKER WIRE CONNECTION Connect the RED (+) and BLACK (-) terminals from the left speaker to the corresponding terminals on the right speaker using a speaker wire. Be sure to match the red-colored side of the speaker wire with the RED (+) terminals and the black-colored side to the BLACK (-) terminals on each speaker.
MENU BACK VIEW R A1 AUDIO INPUT L A2 AUDIO IN USB CHARGE (for use with iPod, mobile phone, PC or other products with mini-jack output): A1. For charging your iPod while playing, connect the 30 -pin cable from the iPod to USB jack on the Combo Port. Use a USB extender Cable if extra cable length is needed (for use on a desktop, for example). A2. Connect the long 1/8” mini-jack audio cable from iPod headphone jack to the AUDIO IN jack on the Combo Port.
B1 VIDEO S- VIDEO AUDIO R DVD L TV CD AUDIO OUTPUT OUT TO RIGHT STEREO INPUT R L AUDIO IN 5VDC CHARGE FOR iPOD POWER ON/OFF AC 220 Con guration B 240V 50/60Hz BACK VIEW " outputs): (all products with RCA B1. Connect the STEREO INPUT L/R from any audio source with RCA L/R audio outputs. Notice: for an audio source with RCA output, always use the RCA input on the speaker as well.
Basic Troubleshooting If the front panel LED does not light up, check... that the AC power cord is firmly plugged into the rear panel and wall outlet. to make sure the speaker rear panel power switch is ON. that the speaker is getting power from the wall outlet. that the rear panel voltage selector is matched to the operating voltage. the fuse in the AC IN on the rear panel. If the fuse needs to be replaced it is extremely important to replace only with same fuse type and value.
Argon 7340A/7340 v2 General Specifications: Type: 2-way, powered speaker system Inputs: 1xstereo input, 1x1/8" stereo mini-jack Outputs: USB Type A (power charging only) Main voltages: 220-240V, 50/60Hz Amplifier type: Dual Class AB monolithic Signal-to-noise: >90dB (typical A-weighted) THD: <0.1% at all power settings Crosstalk: >50dB Frequency response: 60Hz-22kHz +/-1.
Quality has always been our driving force and founding Argon Audio is a natural extension of this philosophy. We have 20 years' experience in creating and specifying high quality products, manufacturing them and selling them on to end users with Value-for-Money as the primary aim. And Argon Audio is a brand fully compliant with these values.
