Installation instructions

V 04/10
3
• Do not attempt to repair, disassemble or modify the appliance. The appliance does not contain parts that
can be repaired by the user.
WARNING: ALWAYS UNPLUG THE APPLIANCE BEFORE PERFORMING MAINTENANCE
OPERATIONS.
• Do not place anything on the product; avoid placing wet garments on the fan heater.
• Turn the appliance off if unattended in order to avoid accidents.
• Ensure that the product does not operate in the presence of unsupervised children, animals or disabled
persons.
• If the product is not used for prolonged periods, disconnect the plug, replace the product in its packaging
and store it in a dry, ventilated place.
• Ensure that the air inlet /outlet are not close to walls or curtains when the product is in use, so as to avoid
obstructing the product and hampering its efficiency.
• If the product emits unusual noises or strange smells during operation, interrupt use and unplug it
immediately.
• Do not let the cord dangle over the edge of a sink, worktop or similar objects.
• Handle the appliance, cord or plug with dry hands only.
• Never immerse the appliance in water or other liquids.
• Do not operate the appliance near explosive or inflammable material.
• Always switch off the appliance and unplug it in the following cases:
- If it does not function properly during use.
- Prior to maintenance operations.
- Before removing the plug.
- After using the appliance.
STRUCTURE AND PARTS
1. Front panel
2. Control panel lid
3. Air discharge grille
4. Swinging flap
CONTROL PANEL ON THE APPLIANCE
From left, the symbols on the control panel correspond
to the following functions:
1. POWER/WIND:
ON/OFF
2. HEATER
: heating power selection
0= cold air
I = minimum heating power (1,000 W)
II= maximum heating power (2,000W),
3 - VANE
: horizontal swinging flap
0= swinging off
I = swinging on