EN CERAMIC FAN HEATER AND AIR PURIFIER OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe all the safety instructions; failure to observe the instructions may cause accidents and/or damages. Store these instructions for future reference.
GENERAL SAFETY INFORMATION Use this fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people. Ensure that the mains power complies with the voltage specified on the fan heater ’s data plate (220-240V~/50Hz). This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.
DESCRIPTION OF PARTS 1. Control panel 4 1 2. Liquid crystal display 3. Air delivery grille 7 2 4. Handle 8 5. Base 6 6. Intake grille 7. On/off button 3 8. UV lamp 9. Ion emission 5 FRONT VIEW 9 REAR VIEW HOW TO USE THE FAN HEATER Position the unit on a flat, stable surface. Connect the power cord to a suitable electric socket (220-240V~50Hz). When you move the appliance, use the handle. On/off button (on the rear, above the intake grille) Bring the on/off button to the “I” position.
CONTROL PANEL Buttons ON/OFF button Touching the ON/OFF button the + and - Allows you to adjust the temperature and timer settings of the appliance. appliance will begin to operate. Touching the button ON/OFF once again the appliance will switch off. To switch off the fan heater completely, place the on/off button in the “0” position. SWING button When the unit is operating, touch the SWING button to make the appliance oscillate automatically, shifting the air flow from left to right.
REMOTE CONTROL ON/OFF button Buttons Mode selection button ECO or COMFORT SWING button TIMER / TEMPERATURE button The remote control uses Lithium/Manganese button cells, model no. CR2032 -3 V, compliant with Battery Directive no. 2006/66/CE (supplied with the remote control). HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below) Open the battery cover at the rear of the remote control (press and pull the cover). Place the battery into the cover, observing the correct polarity.
Air filter Appliance casing Filter cover STORAGE If the appliance is not used for prolonged periods, it must be stored together with this manual in its original packaging, in a cool and dry place. Information for correct disposal of the product in accordance with the European Directive 2002/96/EC At the end of its working life this equipment must not be disposed of as an household waste. It must be taken to special local community waste collection centres or to a dealer providing this service.
