Technical data

Substitution of the HEPA filter (suggested every 6 months)

Remove the front panel, remove the prefilter and extract the HEPA filter. Place a

new HEPA filter and then the prefilter. Place at its place the front panel.

Substitution of the UV lamps (medium life 5.000-8.000 hours)

Keep with your hands the lower and upper extremities of the lamp and turn it into

anticlockwise direction till it is in the same direction of the holes that hold the

lamp and remove it by pressing towards the bottom the lower part of the lamp

and towards yourself the upper extremity at the same time.

Insert the new lamp in the holes and turn it into clockwise direction in order to fix

it.

Reassembly of the front panel

In order to assembly the front panel, lean it on the upper hooks or the frame and press the

front panel on the frame in order to assembly it.

Cleaning of the photocatalytic filter

Every two weeks, place the appliance in mode regeneration for 1-4 hours by pressing the

button REVIVAL in order to make the cleaning of the photocatalytic filter and to work with the

maximum efficiency of air purification.

MAINTENANCE INDICATOR

When the indicator MAINTENANCE lights, do as follows: rinse the pre-filter with water and

neutral detergent and let it dry naturally. Do not damage it by scrubbing it or wring it .

The prefilter needs to be washed every two weeks and changed every month.

Check the HEPA filter and substitute it before it becomes dark (dark filter has not got

any efficiency of filtration).

When the maintenance job is finished and the HEPA filter has been substitued, please use a

needle in order to press the button RESET and switch off the indicator.