Technical data

6
While we are in mode sterilization, three indicators will light. If no indicator will light,
you must check the UV lamps: they could be broken.
You have to use the remote control towards the main unit and the receiver.
Make sure that there are no objects in the path of the signal. In the moment during which the
main unit receives the signal, a sound will be emitted.
Avoid to damage the remote control. Do not expose it to the sunlight or near a heater.
APPLIANCE MAINTENANCE
Switch off the air purifier and remove the plug from the socket before disassembling or
assembling the appliance.
The appliance needs substitution of the prefilter, HEPA filter and lamps according to the
suggested frequency. The life of the filters of the HEPA filter and of the lamps change
according to the hours of use. Do not clean the air purifier with water or other liquids.
Front panel assembly and disassembly
Take the lower part of the front panel and move it towards yourselves and towards high.
Pay attention to protect the interlock switch that is in the top high angle just below the front panel.
When the front panel is removed, the appliance will switch off automatically.
If the interlock device is destroyed, the unit will not work.
Substitution of the prefilter (suggested every month)
The prefilter can be washed, we suggest to substitute at least every month. In the package of
the appliance, when you buy it, 6 prefilters are included. In order to substitute it you have to
remove the front panel and press towards the bottom the black tongues.