CERAMIC FAN HEATER HI FAN tower - User Manual Please read the instructions carefully before using the product and keep for future reference.
1. Product features 2 heating power levels (1300W / 2500W) Touch sensor switch LED function indicator With remote control 0.5-7.5 hours timer Automatic horizontal oscillation 90° Overheat protection Tip-over protection With removable air filter for easy cleaning 2. Safety warnings This product is not a toy. It should not be used by children or infirm persons without supervision. Children would be supervised to ensure that they do not play with the appliance.
Do not immerse cord, plug or any part of the appliance in water or any other liquid. Do not use the heater in dusty environments or where flammable vapours are present (e.g. in a workshop or garage). Do not place the heater on or near any other source of heat. Warning: in order to avoid overheating, do not cover the heater. A fire may occur if the heater is covered with or touches flammable material, including curtains, drapes, bedding etc. when in operation.
Please do not put any unit on the product. In order to avoid any accident, please turn off the unit when people leave. Please do not use the product when there are no people to take care of children, animal or the disabled people. If do not use the product for a long time, please disconnect the plug, put the product into the box and stock the product in a dry and ventilated place.
Clean the surface of the unit with damp cloth (or add some detergent). Do not use corrosive detergent or solvent to clean. Not allowed to wash with water. Don’t handle the power cord and plug by wet hands. Don’t insert the wood or metal stick or other slim objects into air inlet or outlet. Don’t put heavy objects onto the power cord. Don’t face the wind outlet to babies for a long time. 3. Assembly instruction Open the packing, take the unit out and unscrew the cover fixer.
4. Parts description 1. Control panel and display 2. Air outlet 3. Power button 4. Handle 5. Air filter & filter cover 5. Operating instruction Firstly, connect the power cord with correct power supply. Power button (at the bottom of rear cover under the removable air filter) Press the power button to “I” position. If you heard the sound of “didi”, the heater is ready to use. Press the button to “0” position to turn off the heater.
ON/OFF (STAND-BY) key Press the “ ” key, the power indicating light will be on, the unit starts operation at low heating power (1300W). Press the key again, then all the functions are stopped and the unit goes into the condition of standby and the power indicating light will be off. To turn OFF completely the unit, press the power button to “0”.
6. Remote control operation Operation instruction of remote control Open the battery cover at the back side of remote control and then push the cover backwards. Insert 4 x AAA batteries in the remote control in right electrode position. (Please refer to the picture of assembling the remote control). There are 4 keys on the remote control and the function is the same as the control panel. Point the remote control to direction of the display of the heater. The signal distance is about 6 m. 7.
1. Clean unit surface Clean the surface with damp cloth (or add some detergent). Do not use corrosive detergent or solvent to clean such as Petrol. Do not wash unit with water. 2. Clean air filter monthly if needed. Remove the air filter for cleaning as shown in the following diagram. Air filter Filter Cover Do not use chemicals for cleaning. Use the soft cloth to wipe the dust. If you use water for cleaning, please make sure the air filter is dry before reinstall back to the unit.
8. Information for correct disposal of the product in accordance with the European Directive 2002/96/EC At the end of its working life this equipment must not be disposed of as an household waste. It must be taken to special local community waste collection centres or to a dealer providing this service.
V1/09
www.argoclima.
