EN CERAMIC FAN HEATER OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe all the safety instructions; failure to observe the instructions may cause accidents and/or damages. Store these instructions for future reference.
GENERAL SAFETY INFORMATION Use this ceramic fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons. Ensure that the mains power complies with the voltage specified on the fan heater’s data plate (230V~/50Hz). This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.
The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot surfaces. Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials. Place the cord far away from busy areas or where it cannot be accidentally pulled-out. Do not operate the fan heater in close proximity to bathtubs, showers, washbasins or pools. Do not position the fan heater below a socket outlet. Do not operate the appliance outdoors.
DESCRIPTION OF PARTS 1 2 4 1. Soft-touch control panel 5 3 2. Liquid crystal display 3. Air delivery grille 4. Carry handle 5. Intake grille with filter that can be removed for cleaning 6. On/off button 6 FRONT BACK HOW TO USE THE FAN HEATER Set up the fan heater in a vertical position on a level and stable surface. Connect the power cord to a suitable electrical socket (230 V ~).
CONTROL PANEL Buttons Allow you to adjust the temperature and timer settings of the appliance. OSCILLATION Button When the unit is operating, touch the button to make the appliance oscillate automatically, shifting the air flow from left to right. The LED is switched on simultaneously.
MAINTENANCE ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE. IMPORTANT: DO NOT SUBMERGE THE CERAMIC FAN HEATER IN WATER Cleaning the outside surface of the appliance Use a soft cloth to remove any dust from the fan heater. If the fan heater is excessively dirty, use a soft cloth moistened with water and a mild detergent at a temperature lower than 50°C. Let the fan heater dry completely before use. Do not use corrosive detergents or solvents such as petrol. Do not wash the appliance with water.
