User manual

RESET INSTRUCTION
MAINTENANCE
REMOTE CONTROL
When an overheat temperature is reached, the heater will be automatically shut off.
1. Unplug the heater and wait 5-10 minutes for the unit to cool down.
2. After 5-10 minutes, plug the unit in again and operate normally.
The opreation of the ceramic heater can be controlled even by the infrared remote control.
The operation of the keys is same as explained in the paragraph “OPERATION”.
The remote control works with bacteries AAA.
In order to insert the batteries, please remove the cap on the rear and respect the pointed our
polarities.
Please remove the bacteries from the remote control when it is not used for a long period of
time.
Do not thown into the environment the exhausted batteries.
SWITCH
AIR INLET
AIR EXIT
PLUG
www.argoclima.com
MADE IN CHINA
V01/09
+
+-
-
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING. MAINTENANCE
DO NOT IMMERSE HEATER IN WATER.
CLEANING: Clean the lter net at least once a month, more often if dirty. A dirty lter could restrict the air ow and cause the heater
to function improperly or shut down.
Do not attempt to remove inlet grill from the heater.
1. Unplug the heater from power source.
2. Vacuum rear grill area of heater with vacuum brush attachment to remove lint and dirt from internal lter. Do not remove grill guard
or allow heater to be operated without grill guard in place.
3. Clean the body with a soft cloth. (NEVER USE ALCOHOL OR SOLVENTS.)
STORAGE: Store the heater with these instructions in the original carton in a cool, dry place.
HiFan Digit Plus_EG_2009_v2.indd 4 29/06/2009 15.53.19