User manual Ceramic heater V01/09 HiFan Digit Plus_EG_2009_v2.indd 1 29/06/2009 15.53.
READ AND SAVE THESE INSTRUCTIONS Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage. Retain these instructions for future reference. GENERAL SAFETY INFORMATION FAN LOW HIGH AUTO °C °C FAN : LOW °C °C HIGH °C AUTO °C °C 1. ON/OFF/MODE switch 2. Timer knob 3.
OPERATION When the heater is plugged in and open the power switch on the rear of the unit base, the LCD will be in sleeping mode 2 seconds and will show ambient temperature. SWING KEY REGULATION + MODE KEY SWING FAN LOW HIGH AUTO °C KEY TIMER FAN LOW HIGH AUTO °C °C °C : KEY REGULATION - TIMER TEMPERATURE : KEY ON-OFF/MODE FAN LOW HIGH Press key ON/OFF/MODE in order to activate the appliance and change the working mode, as described here below.
REMOTE CONTROL The opreation of the ceramic heater can be controlled even by the infrared remote control. The operation of the keys is same as explained in the paragraph “OPERATION”. The remote control works with bacteries AAA. In order to insert the batteries, please remove the cap on the rear and respect the pointed our polarities. + - - + Please remove the bacteries from the remote control when it is not used for a long period of time. Do not thown into the environment the exhausted batteries.
