Operating instructions

11
V 09/12
CONTINUOUS CONDENSATE DRAINAGE
The water removed from the air can be collected in the special tank at the rear (to empty the tank
when full, follow the instructions in the paragraph TANK FULL ALARM LED), or it can be drained
continuously using a PVC hose (not supplied).
When you wish to use this function, remove the
water tank and connect the PVC hose to the continuous
drainage opening.
The PVC hose should be positioned horizontally under the
level
of the drainage opening.
Avoid uneven floors and bending the hose.
Next, reposition the tank.
Connect the hose to a continuous drainage channel.
CLEANING AND MAINTENANCE
MAINTENANCE FOR THE EXTERIOR SURFACE OF THE DEHUMIDIFIER
Warning
Always unplug the appliance before cleaning it, otherwise electric shocks and malfunctions may
occur.
Use a damp and soft cloth to clean the exterior surface of the dehumidifier.
Do not use solvents, petrol, xylene, talcum powder or brushes: these products may damage the
surface or alter the casing colour.
CLEANING THE AIR FILTER
The filter is designed to remove dust or dirt from the air.
If the filter is clogged by dust, electricity consumption will be higher
than normal.
To optimise humidity removal efficiency, clean the filter once a
fortnight.
Cleaning instructions:
1. Remove the tank; grip the lower part of the filter and pull
downwards to remove it completely.
2. Clean the filter using a vacuum cleaner or wash it with clean
water at a temperature below 40°C. DO NOT USE ALCOHOL,
BENZENE OR OTHER AGGRESSIVE PRODUCTS.
3. Leave the filter to dry naturally, then reposition it in the relevant
slot.
Warning
Do not wet the appliance or immerse it in water, otherwise electric shocks may occur.
PVC HOSE FOR
CONNECTION TO
THE OPENING (not
supplied)
CONTINUOUS
DRAINAGE OPENING