Operating instructions

20
V 01/12
(9) CALENDAR and CLOCK BUTTON
1) Clock settings:
With the air-conditioner off, press and hold the button for 5 second to display the time and date.
Use the (+) and (-) buttons to choose the correct date and press clock to set the hours, again using (+) and (-), then
clock to move onto the minutes, to be set using (+) and (-), and then confirm by pressing clock once again.
2) When the parameters flash, adjust the value. After having set it, press
to confirm and move onto the next
setting. If no action is taken within 15 seconds, the clock settings are reset.
4）DAILY/WEEKLY TIMER
After having set the clock, press and hold for 1 second to set the time with reference to a day of the week.
The first icon on the display
indicates that the unit is set to auto-on mode; set hours and minutes for auto switch
on by using the TIMER button to move from one setting to the next. After having set the auto-on time, the icon
will appear, which indicates auto-off: set the hour and minutes for auto-off by using the TIMER button to move from
one setting to the next.
Upon completion, the icon
will appear, indicating that the unit starts the weekly cycle.
Each time the
button is pressed, the parameters follow on from each other in the following order:
Setting day of the week→ auto-on hour → auto-on minutes → auto-off hour → auto-off minutes → weekly cycle.
(when the parameters flash, if no action is taken within 15 seconds, the display reverts to showing normal time).
To change the day of the week, use the (+) and (-) buttons.
When the parameters flash, adjust the value using "+" and "-". Upon completion, press to confirm and move
onto the next setting. During settings,
can be pressed to cancel prior settings. After having set all parameters,
press and hold
for 3 seconds to activate the timer function and the icon will appear; press and hold or
for 3 seconds to pause or cancel the timer and the icon disappears. To reactivate the timer, simply press and
hold
for 3 seconds.
When the timer starts, the display will show the icon
for auto-on, the icon for auto-off and the icon for
the weekly programme.
3 consecutive sounds “bi bi bi” indicate that weekly timer is active.
(10)
CHECK BUTTON
Press and hold the button for 1 second to show all timer settings of the week: press "+" and "-" to control these
settings. When checking the settings, press
to cancel the setting you are checking.
Press and hold
for 10 seconds to lock the control panel, with the icon .
Press and at the same time to remove the lock and the icon will disappear.
Once all these settings are complete, remote control back-lighting will turn off: to reactivate, simply press any button.