Operating instructions

19
V 01/12
2) Function sequence (select by pressing this button consecutively)
Cooling
→ Dehumidification → Heating → Fan
4）Press and hold the
button for ten seconds to change the temperature display from degrees Celsius to degrees
Fahrenheit
.
(4) TEMPERATURE ADJUSTMENT BUTTON
Increase (+):
1) Enables the adjustment of the temperature desired in Cooling and Heating modes
2) Each time the (+) button is pressed, the temperature set increases by 1ºC; by holding the button pressed, the
temperature increases continuously.
Decrease (-):
1) Enables the adjustment of the temperature desired in Cooling and Heating modes.
2) Each time the (-) button is pressed, the temperature set decreases by 1ºC; by holding the button pressed, the
temperature increases continuously.
(5)
ON/OFF BUTTON
Press the POWER button to switch the unit on or off.
When switched on, the appliance will start to operate as it was last set (save function).
(6) SLEEP BUTTON
1) By pressing the button once, the unit enters sleep mode and the display shows the icon ; by pressing the
button a second time, the unit leaves sleep mode and the icon disappears from the display.
When activating the sleep function in Cooling mode, the temperature set increases automatically by 0.5ºC every
half hour for the next 2 hours: it then remains stable for the rest of the night.
When activating the sleep function in Heating mode, the temperature set decreases automatically by 0.5ºC every
half hour for the next 2 hours: it then remains stable for the rest of the night.
2) Each time the electricity power supply is disconnected, sleep mode is cancelled. To restore, simply press the
SLEEP button once. Each time the appliance is switched off, sleep mode is cancelled. To restore, simply press
the SLEEP button once.
(7) TIMER BUTTON (Auto-on/ Auto-off)
If the date and time have been set, by pressing this button consecutively, the timer can be set.
1）Auto-on
When the appliance is off, by pressing the TIMER button the time remaining before the unit is to switch on can be set:
 select hours and minutes.
2）Auto-off
When the appliance is on, by pressing the TIMER button the time remaining before the unit is to switch off can be set:
 Select hours and minutes.
3）When setting the Auto-on timer, the icon
lights up.
When setting the Auto-off timer, the icon lights up.
(8)
FAN SPEED SELECTION BUTTON
Press and hold this button for 1 second to select the different fan speeds.
1) There are 3 possible speeds to be selected in addition to Automatic mode:
Low（
） Medium（ ) High（ ）
2) When activating the unit for the first time, fan speed is pre-set to medium.
3) In all modes, each time POWER is pressed to switch the unit off, the appliance saves the fan speed set and
maintains it when switched back on again.