manual

• Prevent overheating of the heater by keeping the air inlet and outlet unblock.
Do not hang anything in front of or above the heater.
• If overheating should occur, the built overheating safety device will switch off
the heater.
• Do not use aerosol, inflammable substances or materials sensitive to heat in
the flow of hot air.
• Should the heater stop working, fist check if the circuit breaker at the
distribution board is operating, before contacting the manufacturer or the
service agent.
• Never use the appliance with a damaged cord or plug.
• Never insert the plug into a damaged socket.
• If the supply cord or plug is damaged, it must be replaced by the
manufacturer or its service.
• This heater is filled with a precise quantity of special oil. Repairs that require
opening of the radiator body (like oil leakage) are only to be made by the
manufacturer or its service agent, who should be contacted if there is an oil
leakage
• The heater contains no user serviceable parts.
• Do not use the heater with a programmer, timer or any other device that
switches the heater on automatically, since a fire risk exists if the heater is
covered or positioned incorrectly.
• Always unplug the appliance before assembling/disassembling.
• Always unplug the appliance before cleaning.
• Always unplug the appliance when not in use.
• Never use caustic or abrasive cleaning.
• When scrapping the heater, follow the regulations concernine the disposal of
the oil.