EN CERAMIC FAN HEATER OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe all the safety instructions; failure to observe the instructions may cause accidents and/or damages. Store these instructions for future reference.
GENERAL SAFETY INFORMATION • Use this fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people. • Ensure that the mains power complies with the voltage specified on the fan heater ’s data plate (220-240V~/50Hz). • This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.
ASSEMBLY INSTRUCTIONS Open the box and remove the 3 parts of the appliance: body, base and remote control unit. 1. Unscrew the fastening element on the appliance. Fastening element Base 2. Insert the base onto the lower part of the appliance and tighten the fastening element. 3. Stand the appliance on a level surface before switching it on. DESCRIPTION OF PARTS 1. Buttons and LED display 4 1 2. Air outlet grille 3. Base 4. Handle 2 5. Air intake grille 6. ON/OFF button 5 7. Cable 8.
HOW TO USE THE FAN HEATER Position the unit on a flat, stable surface. Connect the power cord to a suitable electric socket (220-240V~/50Hz). When you move the appliance, use the handle. On/off button (on the rear, below the intake grille) Bring the on/off button to the “I” position. When the appliance emits a beep this means that the fan heater is ready for use. Bring the button to the “0” position to switch off the fan heater. .
REMOTE CONTROL ON/OFF button Mode selection button ECO or COMFORT SWING button TIMER button The remote control uses Lithium/Manganese button cells, model no. CR2032 -3 V, compliant with Battery Directive no. 2006/66/CE (supplied with the remote control). HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the drawing here below) Open the battery cover at the rear of the remote control (press and pull the cover). Place the battery into the cover, observing the correct polarity.
Air filter Appliance casing Filter cover STORAGE If the appliance is not used for prolonged periods, it must be stored together with this manual in its original packaging, in a cool and dry place. Information for correct disposal of the product in accordance with the European Directive 2012/19/EU At the end of its working life this equipment must not be disposed of as an household waste. It must be taken to special local community waste collection centres or to a dealer providing this service.
