Instruction Manual

V 02/21

 The most common cause of overheating is the build-up of dust in

the appliance. Remove dust deposits by unplugging the appliance

and cleaning the air outlets and grilles with the aid of a vacuum

cleaner.

 Do not use abrasive detergents for cleaning this appliance. Clean

the appliance with the aid of a damp (not wet) cloth. Always remove

the plug from the mains socket before cleaning.

 To disconnect the fan heater, push the switch to OFF and remove

the plug from the socket. Pull on the plug only. Avoid pulling on the

cord when disconnecting the fan heater.

 Do not place any objects on the cord and do not bend it.

 Before the use of appliance, ensure that the power cord

is fully extended to prevent it from coming into contact with any part

of the heater.

 It is not advisable to use extension cords, as these may overheat

and cause the risk of fire. Do not use a single extension cord to

operate multiple appliances.

 Do not immerse the cord, plug or any other element of the appliance

in water or other liquids.

 Do not touch the plug with wet hands.

 Do not place the fan heater above or near another heat source.

WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT

FROM OVERHEATING.

The symbol below signals the above warning:

 The fan heater may cause the risk of fire if, while in operation, is

covered by or comes into contact with inflammable material

including curtains, drapery, blankets, etc. KEEP THE FAN HEATER

AWAY FROM THESE MATERIALS.

 Do not connect the appliance to the mains power before it has been

properly assembled and positioned.