Operation Manual

22
V 09/16
Use the appliance to dry clothing.
Use the appliance outdoors.
MINIMUM DISTANCES
between the top of the wall-mounted fireplace and the ceiling: 30 cm.
between the bottom of the wall-mounted fireplace and the floor: 20 cm.
from the sides of the fireplace: 10 cm.
from the front panel of the fireplace: 50 cm.
WALL MOUNTING
WARNING!
DO NOT CONNECT THE APPLIANCE TO THE MAINS POWER SUPPLY BEFORE INSTALLATION
Argoclima S.p.A. accepts no responsibility for any injury or damage that may result from improperly
performed installation / handling.
Finding the best place to mount the fireplace, considering the positioning of furniture and windows and compliance with
suggested distances.
To ensure safety, check that the wall and the fixing elements have the load capacity to support the weight of the
fireplace. The appliance should not be installed until drywall plastering and / or sanding and painting of walls have been
completed.
The wall where the appliance is to be mounted must be capable of long-term support of the total appliance load
and have sufficient strength to withstand phenomena such as earthquakes, vibrations, and other external
events. Plasterboard is not considered a structural material; we therefore recommend that you do not rely on
plasterboard fastenings to support the weight of the appliance.
Do not obstruct the appliance ventilation holes. The wall on which the appliance is mounted must be flat. Mount only on a
vertical surface. Avoid slanted surfaces. Mounting on anything other than a vertical wall may result in fire, damage or
injury.
Depending on the conditions of the wall, you may need to use extra fastening hardware in addition to that supplied. In
this case, the additional hardware and plugs must be of the same size and type as those supplied.
INSTRUCTIONS FOR WALL MOUNTING
The fireplace packaging contains all the accessories necessary for wall-mounting.
The procedure is as follows:
1. Remove the wall mounting bracket from the back of the unit as described in the figures: loosen the two screws
at the top of the two vertical bars of the wall bracket, then remove the bracket from the unit.
Mounting Bracket
Wall mounting
brackets