Operation Manual

21
V 09/16
HOW TO INSTALL THE ELECTRIC FIREPLACE
The fireplace can be used on the floor, after installation of the rectangular base, or alternatively it can be wall-
mounted using the specific accessories supplied.
INSTALLATION KIT COMPONENTS
1. SCREWS - M4 x 8 mm x 12 2. LARGE PLUG x 5 3. SCREWS – M5 x 50 mm x 5
FIREPLACE COMPONENTS TO ASSEMBLE
1. Panel in tempered glass 2. Firebox 3. Wall mounting brackets
1. Firebox support structure 2. Front support bracket 3. Hot air outlet flap
1. Fireplace base plate 2. Firebox wood block 3. Remote control
CHOOSING A LOCATION FOR INSTALLATION
The fireplace circulates hot air by convection and creates a current of air in the surrounding area: the heat can thus
reach the walls near the fireplace. Avoid mounting the fireplace on walls with painted surfaces or delicate coatings.
Carefully check the solidity of the walls on which you want to hang the fireplace.
DO NOT
Mount the fireplace on the floor or ceiling.
Recess mount any part of the fireplace.
Run the power cord under a rug.
Position electrical appliances immediately above the fireplace (e.g. TV).
Position the fireplace in a place where curtains or drapes might cover the air intake grilles.
Position the fireplace next to a door that opens often, creating the risk of impact/damage.
Sit or stand on the fireplace.