Operation Manual

25
V 09/16
MOUNTING PORTABLE FIREPLACE
In the packaging the fireplace is also provided with a base for use as a portable device.
The procedure for assembly of the fireplace is as follows.
1. Align and fix the top support bracket of the firebox to the base with four M4 screws (1) and fully tighten the screws
with a Phillips screwdriver.
The top hooks locate at the front
Table top support
Table top base
2. Fix the flap to the front support bracket with two M4 x 8 mm screws (1), as shown.
3. Slide the front part onto the upper support bracket of the firebox and place the assembly on the base plate.
Front brace
Table top support
Table top base
Front brace
Heat Deflector
Upper firebox support
Firebox base
Hooks positioned frontally
Air flap
Front support
bkt
Front support
bkt
Upper support
bkt
Base