Technical data

20 Drain pump
Pump operates when the unit is running in COOLING and DRY modes. The level detection
is done through a float switch connected at the input FS (closed under normal condition,
and opened when water overflows). System operation is according to the following chart:
21 Safety thermostat
The unit is equipped with a double safety system
to prevent overtemperature of the electrical heater
The control of temperature is done throughby
the automatic thermostat (AT) and safety
thermostat (ST).
The safety thermostat (ST), if activated,
can be reset only manually by pushing
the button, placed on the right side of the
air inlet, behind the air filter.
Pagina 19