Instruction Manual

14
V 07/22
• Do not connect the appliance to the mains power before it
has been properly assembled and positioned.
• Do not run the cord under carpets. Do not cover the cord
with blankets, carpets or similar materials. Place the cord far
away from busy areas or where it cannot be accidentally
pulled-out.
• Do not operate the fan heater in close proximity to bathtubs,
showers, washbasins or pools.
• The heater should not be placed immediately below a
power outlet.
• Do not operate the appliance outdoors.
• Upon initial start-up, the fan heater may emit a slight, harmless
smell. This smell is a normal effect of the initial heating up of
the internal heating elements, and should not recur later on.
• WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH
AS THE SOLE MEANS OF DISCONNECTING POWER. WHEN
SERVICING OR MOVING THE FAN HEATER, ALWAYS UNPLUG
THE POWER CORD.
• A fan heater has hot and arcing or sparkling parts inside. It
must not be used in potentially dangerous locations such as
flammable, explosive, chemical-laden or wet atmosphere.
• Do not place the fan heater on soft surfaces, like a bed,
where openings may become blocked. Always place the
fan heater on a stable, flat, level surface when operating, to
avoid the chance of the fan heater overturning. Locate the
power cord so the fan heater or other objects are not resting
on it.
• Always unplug the fan heater when not in use.
• In order to avoid accidents turn unit off if unattended.
• In the event of any problems (abnormal noise or a strange
smell) switch off the appliance immediately, do not