Instruction Manual

13
V 07/22
technical personnel to examine the appliance or perform
any electrical or mechanical repairs.
• The most common cause of overheating is the build-up of
dust in the appliance. Remove dust deposits by unplugging
the appliance and cleaning the air outlets and grilles with
the aid of a vacuum cleaner.
• Do not use abrasive detergents for cleaning this appliance.
Clean the appliance with the aid of a damp (not wet) cloth
rinsed in hot soapy water. Always remove the plug from the
mains socket before cleaning.
• To disconnect the fan heater, push the switch to OFF and
remove the plug from the socket. Pull on the plug only. Avoid
pulling on the cord when disconnecting the fan heater.
• Do not place any objects on the cord and do not bend it.
• It is not advisable to use extension cords, as these may
overheat and cause the risk of fire. Do not use a single
extension cord to operate multiple appliances.
• Do not immerse the cord, plug or any other element of the
appliance in water or other liquids.
• Do not touch the plug with wet hands.
• Do not place the fan heater above or near another heat
source.
• WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT
FROM OVERHEATING.
• The symbol below signals the above warning:
•
• The fan heater may cause the risk of fire if, while in operation,
is covered by or comes into contact with inflammable
material including curtains, drapery, blankets, etc. KEEP THE
FAN HEATER AWAY FROM THESE MATERIALS.