Operation Manual

16
V 12/16
The appliance does not need to be installed.
Position the unit on a flat, stable surface and connect the power cord to a suitable power socket (230 V~): you will hear a
sound to indicate that the appliance is in standby and the fan can be switched on using the ON/SPEED button. The fan
can be switched off using the OFF button.
When you move the appliance, use the handle on the back. Do not use this fan in an area with high humidity, rich of dust
or with a temperature exceeding 40 ° C.
This product can be used both as a fan, with 3 modes (Normal, Natural and Sleep) and 3 fan speed options (low, medium
and high) and as nebulizer.
MISTING FUNCTION
In this case the rear tank should be filled with demineralized water, up to but not exceeding the maximum level as
indicated.
Through a high-frequency vibration (not audible and not harmful to people) the water under the tank is
nebulized and sucked into the tube up to the misting plate where it is emitted into the room.
There is no need to heat or to add any chemical agent. The refreshing action of water can give a sense of well-being
when the environment is dry.
When the water below the tank falls below the minimum level, the appliance emits a sound and the nebulizer switches off.
L’apparecchio può essere usato come nebulizzatore anche a ventilazione spenta tramite i pulsanti MIST. La velocità di
ventilazione (1,2,3) rimane in memoria quando si spegne la ventilazione con il pulsante OFF.
HOW TO USE THE APPLIANCE
CONTROL PANEL AND AVAILABLE FUNCIONS
DISPLAY
1.Misting icon (on/off)
2.Power on icon
3.Wind speed icon (speed 1, 2 o 3)
4.Timer icon (off/on 1 to 9 hours)
5.Fan function icon (on/off)
6.Rotation icon (on/off)
BUTTONS ON THE CONTROL PANEL
7.ON/OFF button
8.SPEED button
9. MIST button
10.TIMER + button
11.ROTATE/CHILD LOCK button
12.TIMER - button