Operating instructions

16
V 03/14
Cooling
To empty the tank, switch the air conditioner off and unplug
it. Remove the drainage hole cap at the bottom on the right
and connect a little tube through which drain the
condensate; place the other end on top of a normal
reservoir.
Ensure that the tube is not twisted or bent. The tube must
slope downwards. Close the drain again with the cap and
restart using the air conditioner.
Dehumidification
ATTENTION!
When using the air conditioner in Dehumidification mode,
we recommend always ensuring continuous drainage, in
order to guarantee maximum dehumidification efficiency.
To empty the tank, switch the air conditioner off and unplug
it. Remove the drainage hole cap below the filter on the
side and connect a little tube through which drain the
condensate; place the other end on top of a normal
reservoir.
REMOTE CONTROL & LEDS
(1) ON/OFF BUTTON (POWER)
(2) COOLING MODE SELECTION BUTTON
(3) DEHUMIDIFICATION MODE SELECTION BUTTON
(4) FAN MODE SELECTION BUTTON
(5) LOW FAN SPEED SELECTION BUTTON
(6) MEDIUM FAN SPEED SELECTION BUTTON
(7) HIGH FAN SPEED SELECTION BUTTON
FOR OPTIMAL REMOTE CONTROL FUNCTION, POINT IT TO THE RECEIVER ON THE AIR
CONDITIONER, PLACED ON THE RIGHT OF THE LEDS, HIDDEN UNDER THE TOP RING.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
LED
V
entilation
LED
Dehumidification
LED Cooling
Signal receiver