Operating instructions

14
V 03/14
USE WITH TERMINAL CONNECTION FOR WINDOW
Connect the end part of the flexible hose (5) to the flat
connector (4).
Open the windows and block one of the two leafs with the
handle.
Rest the terminal connection on the fixed leaf, bring the other leaf of the window close.
Avoid tight curves and folds in the flexible hose.
Connect the power cord to a suitable electrical socket (220-240V).
HOW TO USE THE APPLIANCE
This appliance can be used to Cool, Dehumidify and Ventilate. In changing from one mode to another, the fan continues to
operate but the compressor stops; the compressor starts up again 3 and a half minutes later. This delay in start-up protects
the compressor from any damages.
Using it as room air conditioner
(with flexible hose connected)
Using it as Spot Cooler or Dehumidifier
(without flexible hose)
THE DISCHARGE TUBE MUST BE CONNECTED to the unit when it is used as ROOM AIR CONDITIONER.
IMPORTANT!
When using it as SPOT COOLER or as DEHUMIDIFIER
the hose must not be connected: in the specific case of
use as a dehumidifier, you must also close the door at
the outlet of the hot air: in this way, the hot air is
ducted upwards and "mixes" with cool air, thus
increasing the effectiveness of dehumidification.
Clean the air filters under the side flaps regularly to keep the air conditioner working efficiently.