Operating instructions

13
V 03/14
APPLIANCE START-UP
Elements supplied with the unit (shown in the box here below).
Slim Remote control Battery for remote control
Type CR2025- 3V - Lithium.
Connector with magnet to be
placed on the hot air outlet on
the unit, after having connected
the flexible hose, complete of
the terminal flat connector.
Flexible hose for hot air expulsion
Terminal flat connector to be
connected to the flexible hose
and to be placed between the
window leafs.
Place the product vertically on a stable, flat surface, as close to a window as possible, keeping a minimum distance of 50
cm from walls or other nearby obstacles.
FITTING HOSE FOR AIR EXPULSION
Insert the terminal connector to be placed between the window leafs on the hose, rotating the connector counter-clockwise,
according to the arrow (1).
Then, connect the air discharge hose complete of the terminal connector, to the connector with the magnet, that must be
placed to the hot air outlet on the unit, always turning it counter-clockwise, according to the arrow (2).
Connect the hose complete with connectors to the unit (3)
To remove the hose, turn it clockwise.
(1)
(2)
(3)