Operating instructions

12
V 03/14
INSTRUCTIONS TO REMOVE THE PACKAGING
1. Place the unit in the correct upright position before
unpacking.
2. Cut the two packing straps.
3. Slide the carton upwards and remove the product
from the base.
4. Pull from the bottom of the package, the flexible
hose, the terminal connector (divided in two parts a
and b) and the connector with the magnet to be
placed on the unit to connect the hose.
5. Install the exhaust hose on the unit before
operating the unit in Cooling mode.
DESCRIPTION OF THE APPLIANCE
FRONT VIEW
1. Upper air filter
2. Cold air inlet
3. Bottom air filter
4. Hot air inlet
5. Horizontal motorized flaps
SIDE VIEW
6. Upper air filter
7. Cold air inlet
8. Condensate drain hole (Dehumidification)
9. Bottom air filter
10. Hot air inlet
REAR VIEW
11. Control panel
(button for
operation without
remote control)
12. Cool and/or dehumidified air outlet
13. Hot air outlet
14. Connector with hooks and magnet to be placed on
the unit, on the hot air outlet.
15. Air expulsion hose
16. Terminal connector
(a+b)
17. Small door (to be
kept open in Cooling mode, to be closed in
Dehumidification mode only).
18. Condensate drain hole (Cooling)
Operation limits: min/max. (indoor temperature):
Cooling: 17°C D.B. - 13°C W.B./ 32°C D.B. – 23° W.B.
Dehumidifying: 5°C D.B./32°C D.B