Operating instructions

V 07/10 3
• An electric underblanket contains parts that generate arcs or sparks. Do not use the underblanket in potentially
dangerous areas such as areas at risk of fire or explosion, or environments filled with chemical substances or humidity.
• This electric underblanket must be used between the mattress and bed sheet and, thus, must always be placed on a
stable mattress. Do not use the underblanket on unstable supports such as water beds, beds that fold mechanically or
sofa beds.
• To reduce wear and ensure that the underblanket remains clean, always place it under a bed sheet.
• Do not place the underblanket under another blanket, mattress cover or similar products: besides compressing it, these
objects reduce its heating power.
• The electric underblanket must be secured to the mattress with the appropriate cords: these must be passed through
the loops and under the mattress then knotted together sufficiently tightly (while ensuring that they can be loosened) so
that the underblanket does not move. The switch should be placed on the pillow side.
• Place the power cord far away from busy areas or places where it can be accidentally pulled-out.
• This electric underblanket cannot be used in bathrooms, laundry rooms, next to a shower or swimming pool or in similar
indoor environments. Never position the electric underblanket where it may fall into a bath or other containers filled with
water.
• Do not allow the power cord to touch the hot parts when the electric underblanket is in operation, in order to prevent the
heat from damaging the cord.
• The cord must be kept far away from heated surfaces.
• Do not operate the electric underblanket outdoors. Do not operate the electric underblanket next to an open window.
WARNING: do not operate the electric underblanket with a programmer or any other device that automatically
turns on the underblanket, as this may cause the risk of fire.
• Do not attempt to repair, dismantle or modify the electric underblanket. The underblanket does not contain parts that
can be repaired by the user.
• Turn the switch off and remove the plug before carrying out any maintenance work or moving the electric underblanket.
Always remove the plug from the socket when the electric underblanket is not in use.
WARNING: ALWAYS REMOVE THE PLUG WHEN CARRYING OUT MAINTENANCE WORK OR MOVING THE
ELECTRIC UNDERBLANKET.
• If the electric underblanket is not used for prolonged periods, remove the plug, replace the underblanket in its box and
store it in a dry, ventilated place.
WARNING:
THE ON/OFF SWITCH IS NOT THE ONLY METHOD OF DISCONNECTING THE MAINS POWER.
ALWAYS PULL OUT THE PLUG FROM THE SOCKET IN THE EVENT OF MAINTENANCE OPERATIONS, WHEN
MOVING THE ELECTRIC UNDERBLANKET OR WHEN IT IS NOT USED.
• Consult a doctor before using the electric underblanket when in doubt as to its possible effects on health.
• In the event of prolonged pain affecting the muscles or joints, interrupt use and consult a doctor.
DESCRIPTION OF PARTS
A. Heating surface.
B. Control with switch, to be connected to the
electrical contacts on the underblanket and
power cord.
The single version has a single control only,
while the double version has two controls that
allow for separately controlling the heating of
the two zones (maximum power 60 W per zone).
C. Gilded anti-rust electrical contacts.
A
B
C