Operation Manual

15
V 05/16
he appliance is fitted with an anti tip-up device that prevents it from operating when it detects that the product is inclined.
Do not position the appliance on its side or upside down.
WARNING: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE.
WHEN YOU TURN THE APPLIANCE ON AGAIN, AFTER SWITCHING IT OFF BY MEANS OF THE BUTTON
ON/OFF AND REMOVING THE PLUG FROM THE SOCKET YOU HAVE TO RESET THE DESIRED MODE
(ECO/COMFORT), TEMPERATURE AND OSCILLATION FUNCTION (SWING).
The remote control uses Lithium/Manganese button cells, model no. CR2032 -3 V, compliant with Battery Directive no.
2006/66/CE (supplied with the remote control).
REMOTE CONTROL
Buttons
Mode selection button
ECO or COMFORT
TIMER / TEMPERATURE
button
ON/OFF
button
SWING button
ON/OFF buttons
Touching the ON/OFF button will cause the
LED to light and the appliance will begin to
operate in COMFORT mode. Touching the button
ON/OFF once again the mode selection LED will
switch off. To switch off the fan heater completely,
place the on/off button in the “0” position.
ECO/COMFORT selection button
- ECO mode: 1400 W reduced power to
save energy
- COMFORT mode: maximum heating
power (2400W)
ECO is the default mode.
SWING button
When the unit is operating, touch the
SWING button to make the appliance
oscillate automatically, shifting the air flow
from left to right. The LED
is switched
on simultaneously.
Touch the SWING button once again to
interrupt the oscillation and switch off the
LED.
SET - TIMER / TEMPERATURE button
When the appliance is operating, the operating time can be set by
touching this button:
the timer display shows a flashing 0 and the
buttons can be operated to set the desired time, between 1 and 12 hours,
with each touch corresponding with 1 hour. The display shows the set
time: wait 5” for the setting to be confirmed. The unit will switch off
automatically at the end of the programmed time.
After the timer has been set, touching the button once again will allow you to
set the temperature: the display will show ambient temperature and, by
operating the buttons, the desired temperature can be set between 15
and 35°C. Once the desired temperature has been set, wait 5” for the setting
to be confirmed. After 5” the display will show the ambient temperature once
again. If no settings are made, the default temperature is 25°C.
The default temperature is 25°C.
Buttons
Allows you to adjust the
temperature and timer settings of
the appliance.