Operation Manual

24
V 10/16
OPERATING INSTRUCTIONS
OPERATION IN THE “AUTO” MODE
The AUTO mode automatically activates after pressing the ON/OFF button
when turning on the humidifier, without selecting any function.
In this mode, the sensor installed inside the humidifier detects the temperature
and humidity of the surrounding atmosphere and compares the values with the
most appropriate humidity % for the environment (as calculated in relation to
the latter's temperature), and accordingly adjusts the appliance’s operation so
as to achieve the optimal humidity level for the given temperature conditions.
The AUTO mode may also be selected by pressing the
SET UP button: each time this button is pressed, the humidifier sequentially
switches from the "QUIET" mode to the "CUSTOM SETTINGS" mode to the
“AUTO” mode.
Ambient
temperatur
e
Most appropriate
humidity level
<19°C 65%
20~21°C 60%
22~24°C 55%
>25°C 50%
ADJUSTING THE HUMIDITY LEVEL IN THE “AUTO” MODE
The mist emission is automatically adjusted in
relation to the difference between the detected
humidity and the ideal humidity.
When the tank is filled with water, the
"WATER" signal initially lights up in red on the
display, but after 2-5 seconds the humidifier
activates (it takes roughly 2-5 seconds for the
water to pass from the tank to the underlying
slot where the nebuliser is located).
Mist level adjustment in the AUTO mode
Difference between the
appropriate humidity
level and the current
humidity level (%).
Mist emission level
(operation display)
>16
High level
>4<15 Medium level
<3
Low level
The current humidity
is higher than the
appropriate humidity.
Mist emission stops
OPERATION IN THE “QUIET” MODE
To select this mode, press the “SET UP" button
once while the appliance operates in the
automatic mode.
 The indication “Zzz” on the display signals
that the “QUIET” mode has been set.
 The ideal level of humidity in this mode is
50%.
When the water in the tank is used up, the
buzzer does not sound in this mode: the signal
"WATER" simply lights up and the appliance
stops.
Mist level adjustment in the QUIET mode
.
Difference between the
appropriate humidity
level and the current
humidity level (%).
Mist emission level
(operation display)
>16
High level
>4<15 Medium level
<3
Low level
The current humidity
is higher than the
appropriate humidity.
Mist emission stops
The humidity level that appears on the display is that detected by the sensor inside the product.
It does not correspond to the actual humidity in the environment.
OPERATION IN THE “NIGHT” MODE
The NIGHT mode automatically activates after pressing the NIGHT button, to reduce the display brightness at night.