Operation Manual

28
V 10/16
CLEANING AND MAINTENANCE
PRECAUTIONS
Warning
 Always remove the plug from the socket before cleaning the appliance, or electric shocks and
malfunctions may occur.
MAINTENANCE OF THE HUMIDIFIER’S EXTERIOR SURFACE
Use a damp and soft cloth to clean the humidifier’s exterior surface.
Warning
 Do not wet the appliance or immerse it in water to avoid electric shocks.
 Do not use solvents, petrol, xylene, talcum powder and brushes: these products may damage the surface
or alter the casing colour.
CLEANING THE WATER TANK
 Remove dirt from the water tank with the aid of a soft, damp cloth.
 Use the brush supplied with the humidifier to remove deposits from the
smallest components then clean with a damp cloth.
 Clean the appliance once or twice a week.
1. Water tank
CLEANING THE BUOY
 Ensure that no dust is deposited around the buoy and clean the latter
using the brush supplied with the humidifier: remove any deposits from
the smallest components then wipe with a damp cloth.
 Clean the humidifier once or twice a week.
2. Buoy
CLEANING THE NEBULISER
 Clean the deposits on the nebuliser using the brush supplied with the
humidifier then wipe with a damp cloth.
 Clean the humidifier once or twice a week.
Warning
 Do not use metal brushes, metal blades, abrasive brushes or talcum
powder to clean the nebuliser surface. These products may deform the
nebuliser or cause abrasions, thereby leading to reduced mist emission
and other malfunctions.
3. Nebuliser