Operation Manual

25
V 10/16
OPERATING INSTRUCTIONS
CUSTOM SETTING MODE
Press the “ON/OFF” button to start the appliance. Press the “Set up” button repeatedly to set the
desired operating mode.
Once the desired mode has been set, the mist emission level can be freely adjusted (to high, medium or
low), the % of humidity and the timer.
MIST EMISSION ADJUSTMENT
By pressing the "MIST CAPACITY" button each time, the amount of
mist emitted can be adjusted (low=L; medium=M; high=H). The display
will indicate the set level.
The discharge nozzle does not emit any mist if the ambient humidity is
higher than the pre-set humidity level.
SELECTING THE MOST APPROPRIATE HUMIDITY LEVEL
The most appropriate humidity level can be selected by pressing the upper and
lower buttons of the humidity adjustment switch.
The setting range varies from 40% to 80%, in 5% intervals.
TIMER ADJUSTMENT
The operating time can be adjusted by pressing the left and right buttons on the
timer.
The setting range varies from “continuous operation” to 8-hour operation, with 1
hour intervals between the steps.