Operation Manual

ManualsBrandsArgo ManualsMiscellaneousGuppy

V 02/14

OPERATING INSTRUCTIONS

Read the instructions carefully before operating the appliance or carrying out maintenance operations.

Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage.

Keep these instructions in a safe place for future reference.

PHOTOCATALYST MOSQUITO TRAP

For mosquitoes and small flying insects

Summary of content (4 pages)

PAGE 1
EN PHOTOCATALYST MOSQUITO TRAP For mosquitoes and small flying insects OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage. Keep these instructions in a safe place for future reference.
PAGE 2
GENERAL SAFETY INFORMATION  Use this mosquito killer only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people.  Ensure that the mains power complies with the voltage specified on the mosquito killer’s data plate (220-240V~50Hz).  This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.
PAGE 3
 In the event of any problems (abnormal noise or a strange smell) switch off the appliance immediately, do not attempt to repair it and take it to your local after sales service. WARNING: DO NOT TO BREAK UV-A LAMPS. They contain mercury that must not be released into the environment. DESCRIPTION OF PARTS 1. Reflective surface 2. Grid with suction fan 3. ON/OFF switch 4. Cable with DC 12 V transformer 5. Insect collection tray 6.
PAGE 4
ON/OFF SWITCH Pressing the ON/OFF switch the appliance turns on and begins to operate. To switch off the mosquito killer press the button again. MAINTENANCE AND STORAGE ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE. IMPORTANT: DO NOT SUBMERGE THE MOSQUITO KILLER IN WATER. Cleaning the outside surface of the appliance Turn the switch off and unplug it before carrying out any maintenance work or moving the appliance. Use a soft cloth to remove any dust from the mosquito killer.