EN SMART FAN OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to do so may lead to accidents and/or damage. Store these instructions in a safe place for future reference.
GENERAL SAFETY INFORMATION Only use this appliance as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons. Make sure that the type of mains power complies with the electrical requirements of the appliance (230 V~/50 Hz).
Do not insert objects into the appliance's grilles. This may cause leakages, short-circuits and damages to the product. Do not leave the airflow directed towards children for long periods of time: it is unhealthy. Do not spray flammable substances or pesticides near the product as they could damage it. Do not pull or drag the power cord after unplugging it. This may damage the cord and cause dispersions and other hazards.
Do not pour water on the product: this may cause a short-circuit and damages to the product. Always switch the appliance off when it is not used for prolonged periods, and always pull out the power cord when it is not used. Avoid using the appliance when children, animals or people lacking motor abilities or self-control are present and unsupervised. Do not use the appliance near a bathtub, shower or swimming pool. Never use the appliance directly under a power outlet.
DESCRIPTION OF PARTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Air entry on right LED indicator Right-hand side panel Touch control panel Rear structure Power cord Nut support Air entry on left Decorative panel Left-hand side panel Front structure Presence sensor Remote control receiver Swinging base Remote control Remote control support Shaft Base Base weight balancing system HOW TO USE THE APPLIANCE INSTALLATION INSTRUCTIONS The appliance must be installed.
Place the unit on a flat and stable surface and connect the power cord to a suitable power outlet (230 V~): the appliance can be switch on using the ON/OFF switch. This product can be used as a fan – in 4 modes (Normal, Natural, Sleep and ECO-Normal) and with 3 fan speed options (medium-low, high and low). The buttons are all touch controls, so the functions can be activated by touching the corresponding buttons on the control panel.
High speed Medium speed Low speed Stop Natural mode at high speed Medium speed Low speed Stop Natural mode at medium speed High speed Medium speed Low speed Stop Natural mode at low speed - Sleeping mode: the unit operates at high natural ventilation speed and decreases by one level every 30 minutes; 1.
VERTICAL SWIVELLING BUTTON When the unit is on, the vertical swivelling movement is not active. The users can press the Vertical Swivelling button to set the vertical swivelling movement while the appliance operates. The indicator will light up; press this button again to switch off the vertical swivelling function.
MAINTENANCE AND STORAGE CAUTION: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE OPERATIONS. IMPORTANT: DO NOT SUBMERGE THE PRODUCT IN WATER. Cleaning the outside surface of the appliance If the front grille of the fan is excessively dusty or dirty, the outward flow of air may be hampered; for this reason, the fan should be cleaned frequently, at least once a month. Use a soft cloth to remove any dust from the product.
