Operation Manual

12
V 06/16
 In the event of any anomalies (abnormal noise, or a strange smell),
immediately turn off the appliance; do not attempt to repair it, and
take it to your local service centre.
DESCRIPTION OF PARTS
1. Controls
2. LED display
3. Front panel
4. Hot air outlet grille
5. Swinging base
6. Air intake grille with filter
7. On/off switch
8. Remote control
HOW TO USE THE FAN HEATER
Set up the fan heater in a vertical position on a level and stable surface.
Connect the power cord to a suitable electric socket (220-240V~/50Hz).
Use the handle to move it.
On/off button (on the back, underneath the air intake grille).
Put the on/off button in the “I” position. When the appliance sounds a beep, this means that the fan heater is ready for use.
Put the button in the “0” position to switch off the fan heater.
LED DISPLAY AND CONTROL PANEL
SWING button to turn on
automatic
swin
g
in
g
.
ON/OFF button
ECO
p
ower mode
ECO power
mode LED
TEMPERATURE and TIMER
button
Press once to set the desired
temperature (5-35° C).
Press twice to set the running
time from 1 to 12 hours.
Press a third time, or wait a few
seconds, to display the room
temperature.
+ and – buttons to
adjust the temperature
and running time of the
appliance
ON/OFF LED
POWER switch buttons
Low power 1300W High
power 2000W
High power LED
Low power LED
Front view Side view Rear view