Operation Manual

13
V 09/16
 Do not move the appliance while it is operating; doing so can
cause leaks and malfunction.

DESCRIPTION OF PARTS
OPERATING INSTRUCTIONS
APPLIANCE START-UP
Place the product on a flat and stable heat-resistant surface, at least 1 metre away from flammable or heat-sensitive
materials and 50 cm away from walls or other obstructions.
Make sure the water tank is in the correct position
.
Connect the power cord to a suitable electric socket (220-240V/50Hz).
Turn the appliance on with the humidity knob (Dry Baby 11) or ON/OFF button (Dry Digit 13 and 17) on the control panel.
OPERATING PRECAUTIONS
The appliance will only start operating if the humidity level in the room is above the set value.
The dehumidifier will continue to operate until the set humidity level has been reached, with the exception of
interruptions caused by a full tank. In this case, empty and reinstall the tank: the dehumidifier will now start running
again.
1) CONTROL PANEL (MECHANICAL OR
DIGITAL)
2) CARRY HANDLES
3) DEHUMIDIFIED AIR OUTLET
4) FRONT PANEL
5) WATER TANK; CAN BE REMOVED FOR
EMPTYING
6) CONTROL PANEL
(MECHANICAL OR DIGITAL)
7) REAR PANEL WITH AIR FILTER
8) CONDENSATE DRAINING HOLE
(2)
(1)
(4)
(3)
(6)
FRONT VIEW
(7)
(8)
REAR VIEW
(5)