Datasheet

14
V 05/13
HOW TO USE THE CONVECTOR
Connect the power cord to a suitable electric socket (220-240V~/50Hz).
ON/OFF switch (on the right side)
Bring the on/off switch to the “ON” position.
When the appliance emits a beep this means that the convector is ready for use.
Bring the switch to the “0FF” position to switch off the convector.
LED DISPLAY
CONTROL PANEL
WARNING: THE TEMPERATURE SELECTION BUTTON IS ACTIVE ONLY IN COMFORT MODE.
The appliance is fitted with an anti tip-up device that prevents it from operating when it detects that the product is inclined.
Do not position the appliance on its side or upside down.
ECO mode:
750 W, reduced power to
save energy
SUPER mode: maximum
power (1500W)
COMFORT mode:
it adjusts automatically heat output and
therefore energy consumption, according to set
temperature.
Timer on setting/
timer set
TIMER button
When the appliance is operating, the operating
time can be set by touching this button: the
timer display shows a flashing 0 and pressing
TIMER you can set the desired time, between
0,5 and 8 hours, with each touch
corresponding to half and hour.
The display shows the set time: wait 5” for the
setting to be confirmed. The unit will switch off
automatically at the end of the programmed time
(stand by).
In order to switch it on again press the button
ON/OFF.
If a TIMER is set the LED
remains on.
ON/OFF buttons
Touching the ON/OFF button will cause the
ECO LED to light and the appliance will begin to
operate in ECO mode. The display will show
ambient temperature. Touching the button
ON/OFF once again the LED will show room
temperature.
To switch off the convector completely, place
the on/off switch in the “0FF” position.
°C
Temperature and timer
display
TEMPERATURE button
When COMFORT mode has been set, touching
this button will allow you to set the
temperature: the display will show ambient
temperature and, by pressing this button, the
desired temperature can be set between 15 and
35°C. Once the desired temperature has been
set, wait 5” for the setting to be confirmed. After
5” the display will show the ambient temperature
once again.
This function is active only in COMFORT
mode.
ECO/SUPER/COMFORT selection
button
- ECO mode: 750 W, reduced power to save
energy
- SUPER mode: maximum heating power
(1500W)
- COMFORT mode: automatic adjustment of
heat emission according to set temperature
ECO is the default mode.
ON/OFF switch