Brochure

AZ-4CP/AZ-6CP Four and Six Zone Valve Controls with
Built-in Circulator or Zone Valve Priority Option
Application Flexibility
■ Four (AZ-4CP) or six (AZ-6CP)
zone valve controller with priority
■ Switchable priority (ON/OFF)
■ Priority zone is field configurable
for use with either circulator or
zone valve
■
Controls three or four wire
24v zone valves
Installation and
Service Features
■ Front window with clearly visible
LED diagnostic lights showing
zones calling and those satisfied
■ Design is compatible with all types
of thermostats, and ensures that relays
energize with power robbing thermostats
■ Auto reset fuse prevents service calls
■ Expandable to 10 zones with
Priority utilizing two AZ Controls
■
Clearly marked terminal for easy
and accurate installation
■
Five year limited warranty,
100% factory tested
Wiring Diagram Notes:
1. The switching relay terminals are
approved for use with copper wires
only. Torque terminal block screws
6 to 7 inch pounds.
2. When using a priority zone circulator,
a jumper is required between terminals
3 and 4 of Priority Zone 1. This jumper
is not required when using a zone valve.
Electrical Specifications
MODEL TRANSFORMER
RELAY
MAX. TOTAL
NUMBER
ZONES
VOLTAGE
SWITCHING
AMP DRAW
ACTION
AZ-4CP 4 120V / 60Hz / 40Va SPST 7.2A
AZ-6CP 6 120V / 60Hz / 75Va SPST 7.2A
AZ-6CP
AZ-4CP
For Indirect
Hot Water Applications
■ Choice of circulator or
zone valve for priority
■ Optimum performance with
circulator priority, increasing
hot water flow up to 20%
■ Option for tankless coil
boiler applications
ZONE VALVE
CONTROLS
®