Specifications

www.evisions.com Argos - Argos Report Writers Guide Page 107 of 118
Document Version 1.0 – Last Updated 10.18.2010
Add the Section for the F Record Type (Summary Section)
The F Record Type is the end of transmission record and must appear as the last record in
the report. Therefore a Summary Section is used for this Record Type.
Add a Summary Section
Add the Summary Section and name it “F Record”. The record will be placed as the last
section. Since this record contains fields to be included in the report, keep the “Print this
section” box checked. At this point, all sections have been added and appear as shown
below.
Figure 182 –The entire report structure
Add the fields
The first 3 fields in this Section (Record Type, Payment Year, and Record Sequence
Number) have already been added to prior sections and can be copied into this section.
After copying, change the value of the Record Type to “F”.
After the Record Sequence Number field, add a constant field containing the number of A
records, which is 1 for this example. The next field is 21 characters and is left blank.
Therefore add a constant field with blanks for the value. Following this field is a 19
character field to be left blank, therefore add the appropriate constant field. Finally, the
last field contains the number of B records, so move the B_Count field from the Datasets
area into the list of fields. When completed, the fields should appear as shown in the
figure below.
Note the field names that were entered to provide meaning to each.