Specifications

www.evisions.com Argos - Argos Report Writers Guide Page 100 of 118
Document Version 1.0 – Last Updated 10.18.2010
Record Sequence Number – Add a COUNT expression as shown below which will
increment for each record.
Figure 170 –Adding the COUNT expression
The COUNT field will then appear as shown in the figure below. Right align the field by
clicking the alignment icon. For the expression value, add “+1” after COUNT to start the
counter at 1.
Figure 171 –The section with 3 fields added
Note in the figure above that 3 fields have been added along with width, field position,
and field type.
Transmitter_TIN and Transmitter_Name – add these dataset fields by double-clicking
on them within the Datasets area. Increase the width of the Transmitter_Name field to 20.
Set the width of Transmitter_TIN to 9.
Number of payees – add this dataset field by double-clicking on the B_Count field in the
Counter dataset. This field contains the number of payees (also the number of B records).
The added fields are shown as follows. Take note of the width, field position, and field
type fields to verify it they are correct.
Dragging Dataset fields
If you drag a Dataset field from the Datasets area
to the Configure Section area, you will need to
click on the field after dragging for the
configurable properties to appear. This step is
not required when using the other methods for
adding fields to a section.