Install Instructions

8
ELECTRICAL SPECIFICATIONS & WIRING
Electrical Specications
ARGO
Model
N u m b e r
Zones
Transformer
Voltage
Relay
Switching
Action
Thermostat
Current (amps)
Single Phase
Motor Rating
(Each Circuit)
120 VAC
ARM-2P 2 120V, 60 HZ, 20VA SPST 0.085 1/3 HP
ARM-3P 3
120V, 60 HZ, 30 VA SPST 0.085 1/3 HPARM-4P 4
ARM-6P 6
AD-1 1
24 VAC
Supplied by ARM
SPST 0.085 1/3 HP
AD-4 4
! !
WARNING
ELECTRICAL SHOCK HAZARD! Disconnect power be-
fore installing or servicing. Can cause severe personal
injury, death, or substantial property damage if ignored.
GENERAL WIRING NOTICE
Electrical shock hazard – Disconnect before installing or servicing.
Can cause severe personal injury, death or substantial property
damage if ignored. All primary wiring must be 14 AWG minimum.
Torque terminal screws 6 to 7 inch pounds. All wiring must be in-
stalled in accordance with:
U.S.A. – National Electrical Code and any other national, state or
local code requirements. Wiring must be N.E.C. Class 1.
Canada – C.S.A. C22.1 Canadian Electrical Code Part 1 and any
other national, provincial or local code requirements. Wiring must
be C.S.A. C22.1 C.E.C, Part 1.