Service manual

Wheels, Axles & Chains Argo Service Manual
Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
14. Turn the front tensioner cam assembly
in the direction which winds up the tor-
sion spring and push the assembly down
as close as possible to the cam follower
block across the bottom of the frame
channels. Clamp it in this position with
a Vice-Grip 10CR or similar plier as il-
lustrated in WA-21
WA-21
15. Perform the service procedure, Drive
Chain Installation, found in the
Wheels, Axle and Chains section of th
673-04 Argo Service Guide.
17. Replace the firewall and floor pans.
16. If you removed the driven clutch and drive belt, reinstall. Refer to Driven
Clutch Installation and Drive Belt Installation in the Clutch Section of
your 673-04 Argo Service Guide.
WA-55A