Service manual

Ontario Drive & Gear Limited www.odg.com

PH.(519)- 662-2840 FAX (519)- 662-2421

Wheels, Axles & Chains Argo Service Manual

15D

15F

15E

101-35 bearing, 101-80 right angled greasable flange & 605-63 flange.. Photo 15E

& F Secure Loosely with (4) flat washers and (4) nylon locknuts.

1. Install a 101-35 bearing and 101-78RM

swivel greasable flange to the previously

installed 605-63 flange at the inner idler

axle location, on both left and right side

of the frame. Photo 15G Secure Loosely

with (4) flat washers and (4)nylon

locknuts.

2. Insert the grease tubing into the bulk head grease fitting. Photo 15 H See NOTE

following page.

Avenger models manufactured from

serial number V23216 have 90

degree greasable fittings oriented as

follows: The left hand side, with the

grease fitting located at the bottom,

facing rearward, Photo 15E, and the

right hand side located at the top,

also facing rearward. Photo 15F

Avengers Manufactured Prior To Serial

Number V23216

IMPORIMPOR

IMPOR

ANTANT

ANT

The swivel grease fitting of the101-78RM is oriented to the bottom of the

flange and facing towards the drivers compartment. Photo 15G

15G

IMPORIMPOR

IMPOR

ANTANT

ANT

WA-33A